Pulsar 710 Control Applet Signatech software enables the user to program all strobe controller current and timing parameters. Currents are programmable for each of four channels, and expressed in amps from 0-25. Timing parameters include pulse width, and post event delay time. All timing parameters are programmed in steps of 1 microsecond, up to a maximum of 1000.
Additional Information Pulse Parameter Range Computer Increment On Time Delay Time Stop Time Off Time Hold Time	Standard Product Information Operating Temperature: 0-55°C Regulatory Compliance CE
Pulsar 710 Schematic
DIMENSIONS ARE IN MILLIMETERS (INCHES)

S4000 Control Applet Signatech Controller Software Signatech software enables the user to program all strobe controller current and timing parameters. Currents are programmable for each of four channels per output, and expressed in milliamps from 0-4000. Timing parameters include pulse width, pre and post event delay time, trigger repeat setting, and a programmable off-time between repetitions. All timing parameters are programmed in steps of 1 microsecond, up to a maximum of 64000.
Additional Information Pulse Parameter Range Computer Increment On Time 0 or 1 to 64000 1 microsec Delay Time 0 or 10 to 64000 1 microsec Stop Time 0 or 1 to 64000 1 microsec Off Time 0 or 1 to 64000 1 microsec Hold Time 0 or 50 to 64000 1 microsec	Standard Product Information Operating Temperature: 0-55°C Regulatory Compliance CE
S4000 Schematic
DIMENSIONS ARE IN MILLIMETERS (INCHES)

S6000 Control Applet Signatech Controller Software Signatech software enables the user to program all strobe controller current and timing parameters. Currents are programmable for each of four channels per output, and expressed in milliamps from 0-4000. Timing parameters include pulse width, pre and post event delay time, trigger repeat setting, and a programmable off time between repetitions. All timing parameters are programmed in steps of 1 microsecond, up to a maximum of 64000. Upon detection of unsafe operating parameters, Signatech will retard either current or timing (selectable) ensuring continuous reliable operation. the software allows three modes of operation: Continuous (DC), Trigger (strobe), and Test. All output settings can be saved and recalled later. Settings already programmed into a Signatech strobe controller can be queried from the controller and saved to a file. The last used settings are recalled automatically at startup.
Additional Information Pulse Parameter Range Computer Increment On Time 0 or 1 to 64000 1 microsec Delay Time 0 or 10 to 64000 1 microsec Stop Time 0 or 1 to 64000 1 microsec Off Time 0 or 1 to 64000 1 microsec Hold Time 0 or 50 to 64000 1 microsec	Standard Product Information Operating Temperature: 0-55°C Regulatory Compliance CE
S6000 Schematic
DIMENSIONS ARE IN MILLIMETERS (INCHES)