FOSTEC/SCHOTT  CV系列
A20500                    Download Sales Sheet
		LiACE® Light Source   Standard Features 1.        Solid state dimmer for continuous control zero to full intensity. 2.        Heavy duty, grounded metal housing. 3.        115 or 230 input voltage versions available. 4.        IR interference filter for cool illumination. 5.        Full illumination on .60" active diameter input 6.        Interchangeable Modulamp® Units offer 2 positions to maximize individual lamp efficiencies. 7.        Choice of three, 150 watt halogen lamps - EJA, EKE, and DDL for intense, uniform illumination. 8.        Built-in thermal shut down. 9.        Quiet rear exhaust. 10.    CSA approved to UL spec,  CE compliant to low voltage and EMC directives. 11.    Stackable with retractable handle. 12.    Low housing temp - slightly above ambient. 13.    Detachable IEC cord.
A20560                    Download Sales Sheet
		Extension Cord ACE® Remote Light Source All the features of our universally accepted ACE® light source with the added convenience of the following:   Remote Features 1.     6’ shielded black cable provides remote intensity control, including  ON/OFF. 2.     Positive locking, quick disconnect cable will not pull out. 3.      CSA and NRTL/C certified to U.L. specs, CE compliant. 4.      10’ shielded extension available as an option. 5.      Control assembly is supplied in black only. 6.      Quantities delivered in 4-5 weeks. Standard Features 1.     Heavy duty, grounded metal housing. 2.      115 or 230 input voltage versions available. 3.     IR interference filter for cool illumination. 4.      Full illumination on .60” active diameter input. 5.      Solid state dimmer control. 6.      Interchangeable Modulamp® Units offer 2 positions to maximize individual  lamp efficiencies. 7.      Choice of three, 150 watt halogen lamps - EJA, EKE, and DDL for intense, uniform illumination. 8.      Built-in thermal shut down. 9.      Quiet rear exhaust. 10.   Zero to full intensity. 11.   Stackable with retractable handle. 12.   Low housing temp - slightly above ambient. 13.   Detachable IEC cord.
A20800                   Download Sales Sheet
		DCR® III Light Source DC regulated light source provides intense, cool illumination. Standard Features 1.     DC-regulated light source limits light fluctuation to ± 0.5% due to line voltage variation. 2.     Universal input voltage – accepts 90 to 265 VAC. 3.     Current limiting – protects the unit from over heating due to defective and aging bulbs. 4.     Transient protection – allows remote location of bulb. 5.      Lamp change indicator light – LED located on front panel changes from green to red when lamp should be replaced. This is due to either an open or partially shorted filament. 6.     Soft start “lamp saver” circuitry. 7.      IR interference filter for cool illumination. 8.     Solid state dimmer control for continuous dimming. 9.      Interchangeable Modulamp® Units offer 2 lamp positions to maximize individual lamp efficiencies. 10.  Choice of three, 150 watt halogen lamps - EJA, EKE and DDL for intense, uniform illumination. 11.  Can power the RS232 from the 9-pin connector. 12.   Built-in 9-pin connector for analog remote control or RS-232 connection. 13.   Detachable IEC cord. 14.   Quiet rear exhaust. 15.   CSA approved to UL spec, CE compliant. 16.   Stackable, with retractable handle. 17.   Low housing temp – slightly above ambient.
A20870                       Download Sales Sheet
		DCR® III Light Source DC regulated light source provides intense, cool illumination.   Standard Features 1.     DC-regulated light source limits light fluctuation to ± 0.5% due to line voltage variation. 2.     Universal input voltage – accepts 90 to 265 VAC. 3.     Current limiting – protects the unit from over heating due to defective and  aging bulbs. 4.     Transient protection – allows remote location of bulb. 5.      Lamp change indicator light – LED located on front panel changes from green to red when lamp should be replaced. This is due to either an open or partially shorted filament. 6.     Soft start “lamp saver” circuitry. 7.      IR interference filter for cool illumination. 8.      Solid state dimmer control for continuous dimming. 9.      Interchangeable Modulamp® Units offer 2 lamp positions to maximize  individual lamp efficiencies. 10.   Choice of three, 150 watt halogen lamps - EJA, EKE and DDL for intense, uniform illumination. 11.  Can power the RS232 from the 9-pin connector. 12.  Built-in 9-pin connector for analog remote control or RS-232 connection. 13.   Detachable IEC cord. 14.   Quiet rear exhaust. 15.   CSA approved to UL spec, CE compliant. 16.   Stackable, with retractable handle. 17.   Low housing temp – slightly above ambient.
A20890                      Download Sales Sheet
	DCR® IV Light Source DC regulated light source with integrated Equalizer™ light feedback to provide stabilized light output for the most demanding machine vision inspection  applications. (See DCR® III Plus datasheet for base description.)   Benefits 1.     Stable lamp output over the life of the lamp and minimized lamp to lamp variation. 2.      Remote controllable using integrated RS232 interface. Standard Features 1.     Flexible - Two configurations available: A.   DCR® IV used with a reference Modulamp® unit and off-the-shelf fiber optics, maintains DDL lamp output a ±2% over the life of the lamp and ±8% lamp to lamp. B. For even greater control, use the DCR® IV with fiber optic products that  have an integrated reference bundle; special order only. This will maintain DDL lamp output and lamp to lamp variation within ±1%. 2.     All of the features of the DCR® III Plus Light Source including control of up to three additional DCR® III light sources via an expansion cable. 3.      LED’s located on the front panel indicate that the lamp intensity is stabilized. 4.     Easy to use front panel controls for calibration and intensity control. 5.      CSA certified to UL, CE compliant to low voltage and EMC directives. 6.      Universal input voltage – accepts 90 to 265 VAC, 50/60 Hz. 7.      Stackable, with retractable handle and detachable cord.
A20900                       Download Sales Sheet
	MHR®-50 Light Source Compact metal halide regulated light source for applications that require bright, white light.   Standard Features 1.     Color temperature of 6000K. 2.      Twice the light output of DDL lamps. 3.      Bulb lifetime of 3500 hours average at 50W output. 4.      Metal halide lamp specifically designed    with highest uniformity. 5.      Solid state dimmer control. 6.      Heavy duty, grounded metal housing. 7.      Universal input voltage - accepts 90 to 265 VAC. 8.      IR interference filter for cool illumination. 9.      Full illumination on .50” active diameter input. 10.   Soft start “lamp saver” circuitry. 11.   Built-in 9-pin connector for analog remote co ntrol. 12.   Built-in thermal shut down. 13.   Quiet rear exhaust. 14.   Infinite setting, thirteen blade iris diaphragm to reduce intensity while maintaining the color temperature. 15.  Stackable with retractable handle. 16.   Low housing temp - slightly above ambient. 17.   Detachable IEC cord. 18.   CSA approved to UL spec, CE compliant.