Powerful, compact PLC with the processing power and expandability of larger PLCs

High Performance, multiple functions, and strengthened lineup to support a wider variety of applications

High Performance, Multiple Functions, and Strengthened Lineup to Support a Wider Variety of Applications

The FP-X PLC comes with a wide range of features suitable for most applications and is designed to save development cost. Ultra high processing speed of 0.32 μsec per instruction (executes a 5 Kstep program in 1.9 msec). Large program capacity of 16, or 32 Kstep exceeds the capacity of most compact PLCs. Expandable up to 382 I/O points, low cost coordinated motion, analog, and communication cassette options are also available.

Excels with networking capabilities

Excellent for communication applications with the ability to network 16 FP-X (master to master network), or 99 FP-X (master to slave network). Modbus RTU master and slave supported (will support up to 63 slave per master). Built-in 8 channels of high speed counters with speeds up to 10 KHz per channel (optional high speed counters also available with speeds up to 80 KHz). USB connection, built-in power supply, removable screw terminals are only a few of the well thought out features of the FP-X PLC.

The transistor type FP-X comes with up to 4 axis of built-in pulse outputs (AFPX-C14 supports 3 axis). Each motion axis can operate independently or as 2 pairs of linear interpolation. The transistor outputs are designed for rugged operation with up to 0.5 Amp load simultaneously on all outputs. The relay type FP-X is also capable of motion by using an optional pulse cassette.

Key features

• High-speed Operation
  The 32-bit RISC processor provides the top-level processing speed in compact PLCs. The scan time is 2 ms or less for 5,000 steps. A high-speed PLC is indispensable for enhancing the functionality of equipment.
• Large Capacity Program Memory
  FP-X, which is equipped with 32k steps*2 program memory, is ideal for fully covering the increasing functions, such as communications, positioning, and analog control. The sufficient program capacity can also support future equipment modifications.
• Independent Comment Memory
  There are difficulties with program management on a PC, such as identifying the latest program. The use of the program in the PLC of equipment in operation is often regarded as the best option. Since FP-X has an independent comment memory, all comments can be stored in the PLC together with programs, facilitating program management and maintenance.
• Maximum Number of I/O Points
  Since up to eight expansion units can be connected to one control unit, the maximum number of I/O points is 300. Furthermore, with the add-on cassette and expansion FP0 adapter connected, the number of I/O points can be increased to 382.
• Built-in 4-axis Pulse Output (Transistor Output Type)
  The transistor output type C14 comes with 3-axis while C30/60 comes with 4-axis pulse output built-in the control unit. The multi-axis control, which previously required a higher-level PLC or additional positioning unit, or two or more PLC units, can now be achieved with only one FP-X transistor output type unit in a small space at a low cost. In addition, as this type does not require a pulse I/O cassette needed for a relay output type, other function expansion cassettes such as communication or analog input can be attached for more diversified applications.
• Modbus-RTU
  Communicates with equipment compatible with Modbus-RTU
• Expansion Cassettes
  Expansion cassettes are available for Extra digital I/O, analog, motion, Ethernet, Serial communication, etc.