Next-generation compact PLC. Medium-scale functionality provided in nano size

More advanced and complex control is required of PLCs in accordance with equipment functionality enhancements. The FPΣ is compact in size but equipped with a RISC processor that processes basic instruction at speeds of 0.32 usec/ instruction. Some of the features that results are super fast floating point calculation, built-in two axis of motion with linear/circular interpolation (expandable to 10 axes), easy PID instruction that supports up to 24 loops, 4 channels of built-in high speed counters, etc.

The FPΣ can support up to 3 serial ports configurable for Modbus RTU, PLC to PLC networking, Mewtocol, and General Purpose (custom communication protocol). The FPΣ has a programming capacity of 32 k steps, and supports up to 384 I/O points.

Key features

Supports high-speed, positioning! Comes standard with pulse output function of maximum 100 kHz.
Linear and circular interpolation 2 Axis motion control.
Program capacity of 32K steps
RISC processor with 0.32 micro second processing speed per instruction
4 different communication cassettes. You can add up to two more ports without increasing the size of the CPU unit.

Contains convenient instructions and functions for temperature control. A control unit that supports thermistor input is also available.
High-level Temperature Control at Low Cost Two built-in thermistors input channels provide high-level temperature control. Thermistors can be connected directly, eliminating the need for an additional unit. The FPΣ can control heaters via PWM outputs controlled by the built-in PID/Auto-Tuning.
Modbus RTU Master/Slave communication
50 Micro second interrupt throughput
Up to 3 serial ports operating at speeds up to 115.2K baud rate.


	FPΣ

Ultra-Slim PLC - FP Sigma Next-generation compact PLC. Medium-scale functionality provided in nano size More advanced and complex control is required of PLCs in accordance with equipment functionality enhancements. The FPΣ is compact in size but equipped with a RISC processor that processes basic instruction at speeds of 0.32 usec/ instruction. Some of the features that results are super fast floating point calculation, built-in two axis of motion with linear/circular interpolation (expandable to 10 axes), easy PID instruction that supports up to 24 loops, 4 channels of built-in high speed counters, etc. The FPΣ can support up to 3 serial ports configurable for Modbus RTU, PLC to PLC networking, Mewtocol, and General Purpose (custom communication protocol). The FPΣ has a programming capacity of 32 k steps, and supports up to 384 I/O points. Key features Supports high-speed, positioning! Comes standard with pulse output function of maximum 100 kHz. Linear and circular interpolation 2 Axis motion control. Program capacity of 32K steps RISC processor with 0.32 micro second processing speed per instruction 4 different communication cassettes. You can add up to two more ports without increasing the size of the CPU unit. Contains convenient instructions and functions for temperature control. A control unit that supports thermistor input is also available. High-level Temperature Control at Low Cost Two built-in thermistors input channels provide high-level temperature control. Thermistors can be connected directly, eliminating the need for an additional unit. The FPΣ can control heaters via PWM outputs controlled by the built-in PID/Auto-Tuning. Modbus RTU Master/Slave communication 50 Micro second interrupt throughput Up to 3 serial ports operating at speeds up to 115.2K baud rate.

Ultra-Slim PLC - FP Sigma

Key features