|
|
| |||||
|
CVシリーズ | ||||||
|
A20500 Download Sales Sheet | ||||||
 |
ACE® Light Source
Standard Features
1. Solid state dimmer for continuous control zero to full intensity.
2. Heavy duty, grounded metal housing.
3. 115 or 230 input voltage versions available.
4. IR interference filter for cool illumination.
5. Full illumination on .60" active diameter input
6. Interchangeable Modulamp® Units offer 2 positions to maximize individual lamp efficiencies.
7. Choice of three, 150 watt halogen lamps - EJA, EKE, and DDL for intense, uniform illumination.
8. Built-in thermal shut down.
9. Quiet rear exhaust.
10. CSA approved to UL spec, CE compliant to low voltage and EMC directives.
11. Stackable with retractable handle.
12. Low housing temp - slightly above ambient.
13. Detachable IEC cord. |
| ||||
|
| ||||||
|
| ||||||
|
A20560 Download Sales Sheet | ||||||
 |
Standard Features 1. Heavy duty, grounded metal housing.
2. 115 or 230 input voltage versions available.
3. IR interference filter for cool illumination.
4. Full illumination on .60” active diameter input.
5. Solid state dimmer control.
6. Interchangeable Modulamp® Units offer 2 positions to maximize individual lamp efficiencies.
7. Choice of three, 150 watt halogen lamps - EJA, EKE, and DDL for intense, uniform illumination.
8. Built-in thermal shut down.
9. Quiet rear exhaust.
10. Zero to full intensity.
11. Stackable with retractable handle.
12. Low housing temp - slightly above ambient.
13. Detachable IEC cord. |
| ||||
| ||||||
|
| ||||||
|
A20800 Download Sales Sheet | ||||||
 |
DCR® III Light Source
DC regulated light source provides intense, cool illumination.
Standard Features
1. DC-regulated light source limits light fluctuation to ± 0.5% due to line voltage
variation.
2. Universal input voltage – accepts 90 to 265 VAC.
3. Current limiting – protects the unit from over heating due to defective and
aging bulbs.
4. Transient protection – allows remote location of bulb.
5. Lamp change indicator light – LED located on front panel changes from
green to red when lamp should be replaced. This is due to either an open or partially shorted filament.
6. Soft start “lamp saver” circuitry.
7. IR interference filter for cool illumination.
8. Solid state dimmer control for continuous dimming.
9. Interchangeable Modulamp® Units offer 2 lamp positions to maximize individual lamp efficiencies.
10. Choice of three, 150 watt halogen lamps - EJA, EKE and DDL for intense, uniform illumination.
11. Can power the RS232 from the 9-pin connector.
12. Built-in 9-pin connector for analog remote control or RS-232 connection.
13. Detachable IEC cord.
14. Quiet rear exhaust.
15. CSA approved to UL spec, CE compliant.
16. Stackable, with retractable handle.
17. Low housing temp – slightly above ambient. |
| ||||
|
| ||||||
|
| ||||||
|
A20870 Download Sales Sheet | ||||||
 |
Standard Features 1. DC-regulated light source limits light fluctuation to ± 0.5% due to line voltage
variation.
2. Universal input voltage – accepts 90 to 265 VAC.
3. Current limiting – protects the unit from over heating due to defective and aging bulbs.
4. Transient protection – allows remote location of bulb.
5. Lamp change indicator light – LED located on front panel changes from green to red when lamp should be replaced. This is due to either an open or partially shorted filament.
6. Soft start “lamp saver” circuitry.
7. IR interference filter for cool illumination.
8. Solid state dimmer control for continuous dimming.
9. Interchangeable Modulamp® Units offer 2 lamp positions to maximize individual lamp efficiencies.
10. Choice of three, 150 watt halogen lamps - EJA, EKE and DDL for intense, uniform illumination.
11. Can power the RS232 from the 9-pin connector.
12. Built-in 9-pin connector for analog remote control or RS-232 connection.
13. Detachable IEC cord.
14. Quiet rear exhaust.
15. CSA approved to UL spec, CE compliant.
16. Stackable, with retractable handle.
17. Low housing temp – slightly above ambient. |
| ||||
|
| ||||||
|
| ||||||
|
A20890 Download Sales Sheet | ||||||
|
DCR® IV Light Source
DC regulated light source with integrated Equalizer™ light feedback to provide
stabilized light output for the most demanding machine vision inspection applications. (See DCR® III Plus datasheet for base description.)
Benefits
1. Stable lamp output over the life of the lamp and minimized lamp to lamp variation.
2. Remote controllable using integrated RS232 interface.
Standard Features
1. Flexible - Two configurations available:
A. DCR® IV used with a reference Modulamp® unit and off-the-shelf fiber
optics, maintains DDL lamp output a
±2% over the life of the lamp and ±8% lamp to lamp.
B. For even greater control, use the DCR® IV with fiber optic products that have an integrated reference bundle; special order only. This will maintain DDL lamp output and lamp to lamp variation within ±1%.
2. All of the features of the DCR® III Plus Light Source including control of up to three additional DCR® III light sources via an expansion cable.
3. LED’s located on the front panel indicate that the lamp intensity is stabilized.
4. Easy to use front panel controls for calibration and intensity control.
5. CSA certified to UL, CE compliant to low voltage and EMC directives.
6. Universal input voltage – accepts 90 to 265 VAC, 50/60 Hz.
7. Stackable, with retractable handle and detachable cord. |
| |||||
|
| ||||||
|
| ||||||
|
A20900 Download Sales Sheet | ||||||
 |
Standard Features 1. Color temperature of 6000K.
2. Twice the light output of DDL lamps.
3. Bulb lifetime of 3500 hours average at 50W output.
4. Metal halide lamp specifically designed with highest uniformity.
5. Solid state dimmer control.
6. Heavy duty, grounded metal housing.
7. Universal input voltage - accepts 90 to 265 VAC.
8. IR interference filter for cool illumination.
9. Full illumination on .50” active diameter input.
10. Soft start “lamp saver” circuitry.
11. Built-in 9-pin connector for analog remote control.
12. Built-in thermal shut down.
13. Quiet rear exhaust.
14. Infinite setting, thirteen blade iris diaphragm to reduce intensity while
maintaining the color temperature.
15. Stackable with retractable handle.
16. Low housing temp - slightly above ambient.
17. Detachable IEC cord.
18. CSA approved to UL spec, CE compliant. |
| ||||
|
| ||||||
|
| ||||||
